Cleaning And Servicing The Device; After Every Use - Silvercrest SKM 600 B2 Instrucciones Breves

Cleaning and servicing the
device
DANGER! Risk of electric
shock!
Disconnect the mains plug 3 from the
wall socket before each cleaning.
Never immerse the base unit 9 in water.
WARNING Risk of material damage!
Never use any abrasive, corrosive or
scouring cleaning agents. These might
damage the device.

After every use

• Clean the device and all accessories
used after each use and remove all food
residues.
• All accessories must be disassembled
and individually cleaned.
For additional information on clean-
ing and looking after the device and
accessories, please see the online
user instructions.
Using the mixing tools
1. Press the unlock button 1 and fold up
the drive arm 12 until it engages and
the unlock button 1 pops out again.
2. Place the mixing bowl 5 into the base
unit 9 in such a way that the metal pins
on the lower edge fit into the recesses in
the base unit.
3. Lock the mixing bowl 5 by turning it to-
wards the closed lock symbol until it is
firmly seated.
CAUTION:
Never use the mixing bowl 5 without
the splash guard 11 attached. The ma-
terial you are mixing could otherwise
be ejected.
4. Place the splash guard 11 onto the drive
arm 12 from below. The arrow () on
the splash guard 11 and the arrow ()
next to the open lock symbol on the drive
arm 12 point to one another.
5. Rotate the splash guard 11 in the direc-
tion of the closed lock symbol until it
clicks into place.
6. Select the appropriate mixing tool.
11
GB