Box Contents; Introduction; Powering Your Alarm Clock Radio; Setting The Clock - i-Star IS-AC01 Manual Del Usuario

Introduction

Your IS-AC01 Projection Alarm Clock Radio projects the time in red
digits onto the ceiling allowing you to see the time at a glance.
Features & Benefits
• 1.2" LED display with dimmer
• 180° image rotation projection with focus adjustment
• FM radio with preset radio station
• Dual alarm settings and choice of wake up by radio or beep
• Snooze/sleep function
• USB charging port

Powering your alarm clock radio

Plug the power adaptor into a mains socket and connect the DC
jack plug to the DC power socket (20) on the back of the unit.
Switch the mains socket power on, the LED screen will light up and
the radio will enter standby mode
• The radio is also equipped with a backup system powered by a
3V lithium CR2032 coin cell (not supplied). If the power is
interupted, the radio automatically switches to the battery power
supply which powers the clock and ensures the timer settings are
not lost. The battery compartment (19) is located on the
underside of the IS-AC01.
1. Use a Phillips screwdriver to remove the screw holding the
compartment door closed and remove the door.
2. Insert the battery into the compartment making sure the positive
and negative (+ or -) sides of the battery are in contact with the
corresponding terminals in the battery compartment.
3. Refit the battery compartment door and replace the screw
Please Note: When replacing the battery, leave the power adaptor
connected. Otherwise, all clock and alarm settings will be lost

Setting the clock

1. In standby mode, press and hold the SET button
(10) to enter the clock setting mode.
2. Press the SET button
setting options:
3 Setting the year: Press the BACKWARD button
>
FORWARD
confirm.
4 Setting month/day: Press the BACKWARD button
month and FORWARD button
(10) to confirm.
PROJECTION ALARM CLOCK RADIO - User Guide
4
(10) repeatedly to cycle through the
Year > Month/Day > Time
(12) button to change the year, press SET
www.philex.com
>
(12) to set the day, press SET
for 2 seconds
<
(11) or
(10) to
<
(11) to set the