Sleep Function; Display Information; Adjusting Display And Projector; Charging An External Device - i-Star IS-AC01 Manual Del Usuario

Sleep function

The sleep function allows you to set a time delay in minutes after
which period the radio will switch off automatically.
1. With the radio playing, press the SLEEP button (3) repeatedly to
select a sleep period (Options: Off, 10, 20, 30, 40, 50, 60, 70, 80,
90, 100, 110 and 120 minutes).
2. The radio will automatically switch off when the sleep period is over.
3. Press the SLEEP button (3) to display the remaining time before
the radio is due to switch off.
4. Press the POWER button

Display information

In standby mode, short press the SET button
day of the week, (d1 corresponds to Monday, d2 = Tuesday,
d3 = Wednesday, d4 = Thursday, d5 = Friday, d6 = Saturday and d7
= Sunday), press again for year, again for month and date and again
for time.
• In radio mode, press the BACKWARD
>
(12) once to briefly change the display from the clock time to
the current radio frequency playing.
Projector
1. Press the
wall or the ceiling of your bedroom.
2. Press and hold the FLIP button (9) to flip the projected image.
3. Turn the FOCUS dial (1) to adjust the image sharpness.
Please Note: The projector is designed for use in dark rooms only
and will not be visible if there are any lights on.

Charging an external device

Connect an external device (e.g. smartphone, tablet or camera etc.)
via a USB cable (not supplied) to the USB port (17) for charging.
The USB port is for charging only and is not suitable for exchange
of data.

Display brightness

In standby mode, press the DIMMER button to change the
brightness level of the clock display options are low / high or off.
This seeting will not affect the brightness of the projector beam.
The low setting is the default (energy saving) setting.
PROJECTION ALARM CLOCK RADIO - User Guide
(15) to cancel this function.
button (9) to project the time onto a nearby
www.philex.com
(10) to display the
<
(11) or FORWARD button
7