Fein ASM 9 Manual De Instrucciones página 16

3 41 01 094 06 0.book Seite 16 Donnerstag, 28. Juni 2007 12:03 12
EN
Instruction Manual for cordless screwdriver.
Symbols, abbreviations and terms used.
Symbol, character Explanation
Do not touch the rotating parts of the power tool.
Be absolutely sure to read the enclosed documentation such as the Instruction Manual and the
General Safety Instructions.
Before commencing this working step, remove the battery from the power tool. Otherwise
there is danger of injury if the power tool should start accidentally.
Use eye-protection during operation.
Use ear protection during operation.
Confirms the conformity of the power tool with the directives of the European Community.
Worn out power tools and other electrotechnical and electrical products should be sorted
separately for environment-friendly recycling.
Do not dispose of batteries in the household waste.
Used batteries can be returned to FEIN for recycling.
Ø Diameter of a round part
Tool holder: Hexagon socket
Tool holder: External square drive
Weight according to EPTA-Procedure 01/2003
Character Unit of measure,
international
V
n /min
0
Nm
M... mm
L dB
wA
L dB
pA
K...
2
m/s
m, s, kg, A, mm, V,
W, Hz, N, °C, dB,
/min, m/s
For your safety.
Do not use this power tool before you have thor-
oughly read and completely understood this
Instruction Manual and the enclosed "General
Safety Instructions" (document number
3 41 30 054 06 1). The documents mentioned should be
kept for later use and enclosed with the power tool,
should it be passed on or sold.
Please also observe the relevant national industrial safety
regulations.
16
Unit of measure,
national
V
rpm
Nm
mm
dB
dB
2
m/s
m, s, kg, A, mm, V,
W, Hz, N, °C, dB,
2 2
/min, m/s
Special safety instructions.
Secure the workpiece firmly. A work piece that is gripped
tightly in a clamping device or vice, is more secure than if
held by hand.
Do not machine any material containing asbestos. Asbestos
is cancerogenic.
Hold the power tool firmly. High reaction torque can
briefly occur.
Do not rivet or screw any name-plates or signs onto the
power tool. If the insulation is damaged, protection against
an electric shock will be ineffective. Adhesive labels are
recommended.
Explanation
Electrical voltage
No-load speed
Torque
Size of metric thread
Sound power level
Sound pressure level
Uncertainty
Acceleration
Basic and derived units of measure from the inter-
national system of units SI.