Eu Declaration Of Conformity - Milwaukee M12 FVCL Manual Original

WARNING Wet fi lters and interior part of the liquid container shall be
dried before storage
Depending on the number of running hours – the dust fi lter should be
renewed. Keep the machine clean with a dry cloth, and a small amount of
spray polish.
Never spray water on to the upper section of the vacuum cleaner. Danger
for persons, risk or short-circuiting.
For user servicing, the machine must be dismantled, cleaned and
serviced, as far as is reasonably practicable, without causing risk to the
maintenance staff and others. Suitable precautions include
decontamination before dismantling, provision for local fi ltered exhaust
ventilation where the machine is dismantled, cleaning of the maintenance
area and suitable personal protection.
During maintenance and repair work all contaminated parts that could not
be cleaned satisfactorily must be:
• Packed in well sealed bags
• Disposed of in a manner that complies with valid regulations for such
waste removal.
This appliance should be regularly inspected by a qualifi ed service
technician at least annually. For example, check the fi lters for damage and
check the airtightness of the appliance and the proper functionality of the
control mechanism.
The appliance must be stored in a dry place and protected from frost.
CAUTION: This machine shall be stored indoors only.
Use only Milwaukee accessories and Milwaukee spare parts. Should
components need to be replaced which have not been described, please
contact one of our Milwaukee service agents (see our list of guarantee/
service addresses).
If needed, an exploded view of the tool can be ordered. Please state the
machine type printed as well as the six-digit No. on the label and order the
drawing at your local service agents or directly at: Techtronic Industries
GmbH, Max-Eyth-Straße 10, 71364 Winnenden, Germany.

EU DECLARATION OF CONFORMITY

We declare under our sole responsibility that the product described under
"Technical Data" fulfi lls all the relevant provisions of the directives 2011/65/
EU (RoHs), 2014/30/EU, 2006/42/EC and the following standards have
been used:
EN 60335-1: 2012+A11:2014+A13:2017+A1:2019+
A14:2019+A2:2019
EN 60335-2-69:2012
EN 62233:2008
EN 55014-1:2017+A11:2020
EN 55014-2:2015
EN IEC 63000:2018
Winnenden, 2021-03-24
Alexander Krug
Managing Director
Authorized to compile the technical fi le.
Techtronic Industries GmbH
Max-Eyth-Straße 10
71364 Winnenden
Germany
GB-DECLARATION OF CONFORMITY
We declare as the manufacturer under our sole responsibility that the
product described under "Technical Data" fulfi lls all the relevant provisions
of the following Regulations S.I. 2008/1597 (as amended), S.I. 2016/1091
(as amended), S.I. 2012/3032 (as amended) and that the following
designated standards have been used:
BS EN 60335-1:2012+A2:2019
BS EN 60335-2-69:2012
BS EN 62233:2008
BS EN 55014-1:2017+A11:2020
BS EN 55014-2:2015
BS EN IEC 63000:2018
Winnenden, 2021-03-24
24 ENGLISH
470 444 - M12FVCL.indd 24 470 444 - M12FVCL.indd 24
Alexander Krug
Managing Director
Authorized to compile the technical fi le.
Techtronic Industries GmbH
Max-Eyth-Straße 10
71364 Winnenden
Germany
SYMBOLS
CAUTION! WARNING! DANGER!
Remove the battery pack before starting any work on the
machine.
Please read the instructions carefully before starting the
machine.
Wear a suitable dust protection mask.
Accessory - Not included in standard equipment, available
as an accessory.
Class III electrical protection.
Do not dispose electric tools, batteries/rechargeable
batteries together with household waste material.
Electric tools and batteries that have reached the end of their
life must be collected separately and returned to an
environmentally compatible recycling facility.
Check with your local authority or retailer for recycling advice
and collection point.
V
Volts
Direct current
European Conformity Mark
British Confomity Mark
Ukraine Conformity Mark
EurAsian Conformity Mark
Dust Class L
(IEC 60335-2-69).
The dusts which belong to this
class have OEL values > 1 mg/
1)
m³.
25.03.2021 13:39:26 25.03.2021 13:39:26