Package Contents; Tools & Materials For Assembly - SPALDING M800020 Manual Del Usuario

Package Contents

Package Contents
Check the contents of each kit and other parts to ensure that all components are present. Keep the kit hardware in
the labeled bag as they will be used in different assembly steps.
BACKBOARD AND RIM ASSEMBLY
WARNING
Read and understand warnings listed below
before using this product.
Failure to follow these warnings may result in
serious injury and/or property damage.
Owner must ensure that all players know and follow these rules
for safe operation of the system.
• DO NOT HANG on the rim or any part of the system including
backboard, support braces or net.
• During play, especially when performing dunk type activities,
keep player's face away from the backboard, rim and net.
Serious injury could occur if teeth/face come in contact with
backboard, rim or net.
• During play, do not wear jewelry (rings, watches, necklaces,
etc.). Objects may entangle in net.
• Check system before each use for loose hardware, excessive
wear and signs corrosion and repair before use.
• Never play on damaged equipment.
• See instruction manual for proper installation and
maintenance.
#1
In the U.S.: 1-800-334-9111
In the U.S.: 1-800-558-5234
In Canada: 1-800-284-8339
In Australia: 1-300-367-582
Trademarks registered
in the USA and other countries. In the U.S.: 1-800-558-5234
In the U.S.: 1-800-558-5234
In Canada: 1-800-284-8339
ID#: 57980001 01/12
1 (x1)
Label, Warning
OLD P/N 579800 5-1/2" High
NEW P/N 57980001 4" Wide
02-2012 PMS 021 for Warning
8 (x1)
Backboard
KIT 1 – 209206
#2
#3
2 Bolt, Hex Flange, 5/16-18 x 2.5 Long (x4)
5 Nut, Hex Flange, 5/16-18 (x6)
Tools & Materials for Assembly
2 Capable
Tape Measure
Adults
#6
MUNSELL NOTATION
Hue Value Chroma
5.0 YR 6.0/15
Equiv. CIE Data
(Y%) x y
30.05 0.5510 0.4214
Approx. PMS Color
13 parts yellow
3 parts Warm Red
1/4 part Black
Warning Area = Orange
Corner Radius = 3/8"
6
Die Cut Label Rim
3.25 Mil Vinyl
All Temp. Permanent Adhesive
1 Mil. Polypropolyne Overlaminate
Illustrator 8.0 = EPS
Backing + 1/16 Circumference
Rolls of 500
3
Step Ladder
(8 ft.)
#7
(x1)
Bolt, Carriage, 5/16-18 x 2.75 Long (x2)
Socket Wrench Socket Wrench
1/2" Extension
4
#8
7 (x1)
Net
#4
#5
4 Washer, 1" O.D. (x6)
203100
NUT, HEX FLANGE, 5/16-18
Wrench 1/2"
(OPTIONAL)
Adjustable
Wrenches