Connecting The Cables - Conceptronic Grab'n'GO Guía De Instalación Rápida

ENGLISH

3.2 Connecting the cables

1) Plug the AC power adapter to the DC power connector located on the server's rear
panel, and then connect it to your local power supply.
2) Plug an Ethernet cable to the LAN port located on the server's rear panel, and then
connect it to the network or directly to a computer for configuration.
Note: We advise to connect the CH3SNAS to your DHCP enabled router for easy
configuration. If you connect the device directly to your computer, or to a
network without DHCP server, you need to setup a temporary static IP address
for your computer to configure the CH3SNAS.
See page 10 of the Full Manual (CD-ROM) how to setup a static IP address.
4 Configuring the CH3SNAS
Easy Search Utility
To access and manage the storage server easily, the convenient utility Easy Search is
provided for you on the Installation CD. Easy Search is a tool that allows you to set up
the storage server's connection.
4.1 How to use the Easy Search Utility
1. Insert the CD-ROM in your CD-ROM Drive. The Autorun should appear automatically.
If the Autorun menu does not appear, navigate to "My Computer" and double-click
on the CD-ROM drive to start the Autorun menu.
2. Select the CH3SNAS Storage Server from the Autorun menu.
24