Conceptronic Grab'n'GO Guía De Instalación Rápida página 27

ENGLISH
Note: You can change the configuration shown in the "Settings" and "LAN" field also
in the Web configuration wizard, described in chapter 4.4
Static section:
The Static field shows the active shares on the CH3SNAS and allows you to easily mount
them to your computer.
Note: Configuration of the CH3SNAS is required before you can mount your shares.
Please continue to chapter 4.3 for the configuration of the CH3SNAS before you
mount any shares on your computer!
4.2 CH3SNAS Web configuration
You can enter the Web configuration of the CH3SNAS in 2 ways:
1) Clicking the "Connect to webpage" button on the Easy Search control panel.
2) Opening the web browser and entering the default IP address "192.168.0.20" in
the address bar and press [Enter].
Enter the username and password and click the "Configuration" button to enter the
SETUP page of the Web Configuration Utility. (Only the administration user "admin" is
allowed to change or modify the configuration settings.)
The default login is: admin (no password is required).
Note:
subnet of the storage server is different than your computer, you cannot communicate
with the device.
Your computer must be in the same subnet as the storage server. If the
27