Technical Parameters; Environment Protection - GRAPHITE 58G782 Manual De Instrucciones

Any maintenance or repairs should be carried out by an authorized service workshop.
During operation of the mixer, carbon brushes of the motor wear out and they should be controlled
and replaced regularly.
Ball bearings of the mixer are greased for the whole time of mixer operation.
REPLACEMENT OF CARBON BRUSHES
Replace immediately worn out (shorter than 5 mm), burnt or cracked motor carbon brushes. Always
replace both brushes at a time.
Entrust replacement of carbon brushes only to a qualified person. Only original parts should be
used.
All faults should be repaired by service workshop authorized by the manufacturer
RATED PARAMETERS
Parameter
Supply voltage
Input current frequency
Rated power
Spindle rotational
speed with no load
Mixer shaft connection
Protection class
Weight w/o mixer paddles
Weight with mixer paddles
Year of production
NOISE LEVEL AND VIBRATION PARAMETERS
Sound pressure Lp = 90,6 dB(A) K = 3 dB(A)
A
Sound power Lw = 101,6 dB(A) K = 3 dB(A)
A
Weighted value of vibration acceleration a
Do not dispose of electrically powered products with household wastes, they should be utilized in proper
plants. Obtain information on wastes utilization from your seller or local authorities. Used up electric
and electronic equipment contains substances active in natural environment. Unrecycled equipment
constitutes a potential risk for environment and human health.
* Right to changes is reserved.
"Grupa Topex Spółka z ograniczoną odpowiedzialnością" Spółka komandytowa with seat in Warsaw at ul. Pograniczna
2/4 (hereinafter Grupa Topex) informs, that all copyrights to this instruction (hereinafter Instruction), including, but not
limited to, text, photographies, schemes, drawings and layout of the instruction, belong to Grupa Topex exclusively and are
protected by laws accordingly to Copyright and Related Rights Act of 4 February 2004 (ustawa o prawie autorskim i prawach
pokrewnych, Dz. U. 2006 No 90 item 631 with later ammendments). Copying, processing, publishing, modifications for
commercial purposes of the entire Instruction or its parts without written permission of Grupa Topex are strictly forbidden
and may cause civil and legal liability.

TECHNICAL PARAMETERS

Electric Mixer
Gear I (low)
Gear II (high)
= 4,687 m/s
h

ENVIRONMENT PROTECTION

Value
230 V AC
50 Hz
1200 W
0 ÷ 580 min
0 ÷ 760 min
M14, internal thread
II
4,3 kg
5,5 kg
2016
2 2
K = 1,5 m/s
12
-1
-1