AIPTEK AN100 Manual De Usuario página 2

User's Manual
7. Ensure that the operating environment temperature is
within 5 ~ 35°C and relative humidity is 20% ~ 80%,
non-condensing.
8. The battery is integrated with the device. Do not dissemble
and modify. The battery should be replaced by an
authorized service center only.
9. Wait before using if the device has been moved from a cold
location into a warm one. Any condensation that has
formed may in certain circumstances destroy the device. As
soon as the device has reached room temperature it can be
used without risk.
10.Handle the product with care. Avoid contact with sharp
objects. Keep device away from metallic objects.
11.Place the projector on a flat surface. Any collision or falling
to the ground is likely to damage the product.
12.Do not drop or disassemble the product otherwise the
warranty will void. Opening or removing covers may expose
you to dangerous voltage or other hazards. Refer all
servicing to an authorized service center.
13.Use only the accessories supplied by the manufacturer.
14.Both product and user's manual are subject to further
updates, modifications or supplement without further
notice.
Care and Safety Information for Pico
Projectors
1. Avoid facing directly into the
projector's lens.
2. During the operation, this product
may heat lightly, which is normal.
3. The device should not be used in
a very dusty environment. Dust
particles and other foreign objects may damage the unit.
4. Do not expose the device to extreme vibrations. It may
damage the internal components.
2