Kohler K-124B16-SANA-CP Manual De Instrucciones página 9

Flex Hose
Supply
Stop
7. Supply Connections
IMPORTANT! The control box cover has slots for the spout tube
and cables. Use care not to pinch the tube or cables when installing
the cover.
Inlet Connections
Connect the flex hose from the control box to the supply stop.
Outlet Connections
Feed the tube from the spout through the slot in the control box
cover.
Verify that the tube from the spout is the appropriate length to
reach the control box. Cut the tube if necessary. Remove any
burrs and sharp edges.
Insert the tube into the fitting (control box outlet end) until the
tube stops.
Verify that the tube is secure.
Kohler Co.
Tube From
Spout
Flex Hose
Outlet
9
Inlet
1386732-2-A