Intended Use; Charger Safety Warnings - Ryobi RY36C17A Traducción De Las Instrucciones Originales

Safety, performance, and dependability
have been given top priority in the design
of your battery charger.

INTENDED USE

This charger is intended to charge only
BPL3615, BPL3620D,
BPL3626D2, BPL3640D, BPL3640D2,
BPL3650D, BPL3650D2, and battery
packs listed in this manual.
The product is only for indoor use, in dry
conditions.
The product is not intended to charge
any other type of battery or be used as
a power supply or any other purpose.
It should never be used in explosive or
infl ammable environments.
Do not use the product for any other
purpose.

CHARGER SAFETY WARNINGS

WARNING
Read all safety warnings and all
instructions. Failure to follow the
warnings and instructions may result
in electric shock, fire, and/or serious
injury.
WARNING
Do not recharge primary cells (non-
rechargeable).
WARNING
Mains voltage must correspond with the
voltage specifications on the product.
■ Before using the product, check that
the charger enclosure, cable, and plug
are not damaged. If damage is found,
do not use the product and bring it to
an authorised service centre for repair.
2 | English
■ The product must not be damp and
should never be used in a damp
environment.
■ The product is for indoor use only.
■ Do not use the product if it has suffered
any heavy shock or jolting, or if it is
BPL3626D,
damaged in any other way.
■ When charging, do not expose the
product to sunlight or other heat source.
The recommended temperature range
at charging vicinity is 10° to 25°C.
■ Due to the heat generated during
charging, do not use the product on a
combustible surface.
■ Do not use the product near flammable
materials, such as cloth, packaging
materials,
aerosols, lubricants, thinners, petrol
containers, gas containers, or gas
appliances.
■ Do not cover any ventilation slots, and
provide adequate ventilation during
operation.
■ Never modify, disassemble, or attempt
to repair the product yourself.
■ Do not allow the charger or battery
packs to become contaminated with
any material that could be conductive,
such as metallic particles from grinding,
cutting, or machining processes.
■ Unplug the product from the power
socket when it is not in use or when
cleaning it.
■ Use only an extension cable that is
approved and in good condition.
■ Do not charge battery packs that
show signs of leaks. Dispose of them
properly.
■ Never charge a damaged battery
pack. Replace damaged battery packs
immediately.
paint, spray paint or