Description Of Symbols - Silverline 251483 Manual Del Usuario

GB

Description of Symbols

The rating plate on your tool may show symbols. These represent important
information about the product or instructions on its use
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Read instruction manual
Caution!
Conforms to relevant legislation and safety standards
Specification
Model:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 251483
Applicable standards: . . . . . . . . . . . . . . . .EN361 (Full Body Harness)
Purpose: . . . . . . . . . . . . . . . . Fall arrest, restraint & work positioning
Material: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Polyester
Maximum strength:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16kN
Temperature range:. . . . . . . . . . . . . . . . . . . . . . . . . . . . -40 to +80°C
Attachment points: . . . . . . . . . . . . . . EN361: Dorsal (A), Sternal (A/2)
Max. user weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .140kg*
Belt size (min. waist) : . . . . . . . . . . . . . . . . . . . . . . . . . . 31" (790mm)
Belt size (max. waist) :. . . . . . . . . . . . . . . . . . . . . . . . . 47" (1200mm)
Net weight: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.30kg
As part of our ongoing product development, specifications of Silverline
products may alter without notice.
*The operator must be able to achieve a safe and comfortable fit, using the
adjustment options provided. The Lateral Attachment Points (11) must be located
at waist level on the user's sides, opposite each other. The equipment must not
be used if it cannot be adjusted to fit the operator comfortably and securely.
Carefully read and understand these instructions and any label attached
to the tool before use. Keep these instructions with the product for future
reference. Ensure all persons who use this product are fully acquainted with
these instructions.
4
EN358 (Work Positioning Systems)
EN358: Lateral (x2)
Safety Instructions for Height
Safety Equipment
WARNING: Activities involving the use of this equipment are inherently
dangerous. ALWAYS carry out a risk assessment before work commences,
including rescue arrangements.
WARNING: Specific training is essential before using this equipment. It
must only be used by competent and responsible individuals, taking care
not exceeding the limitations of the equipment.
WARNING: Failure to adhere to any warnings and recommendations given
in these instructions may result in severe injury or even death! When using
this equipment you personally assume all risks and responsibilities for all
damage, injury or death which may occur during or following incorrect use
of this equipment. You are responsible for your own actions and decisions.
If you are unable, or not in a position to assume this responsibility or
to accept these risks, DO NOT USE THIS EQUIPMENT.
a) NEVER use equipment that has exceeded its shelf
and/or service life.
b) This product MUST NOT be stressed beyond its strength rating.
c) DO NOT use components of fall arrest gear outside its limitations,
or for applications for which they were not specifically designed.
d) Avoid impacts and rubbing against abrasive surfaces during use,
transport and storage.
e) DO NOT use connectors with manual locking mechanisms in
areas where they are frequently opened and closed.
f) Ensure locking mechanisms and safety devices engage securely
and connectors are fully closed and locked before use.
g) NEVER combine components that are not recommended by the
manufacturer as being compatible. One item may interfere with the
safe function of another, jeopardising the function of the system as
a whole.
h) NEVER attach a fall arrest system to an anchorage if you are
unsure about the strength and condition of the anchorage.
i) Take into account the length of every single component of a fall
arrest system, including the connectors, when determining the
total length of the system.
j) The clearance under the user must be sufficient to prevent him
from striking an obstacle in the event of a fall.
k) DO NOT allow any part of a fall arrest, work positioning or
restraint system to come into contact with sharp edges or
abrasive surfaces during use. Reposition if necessary or choose an
alternative anchorage.
l) Any component of a fall arrest system must be individually
inspected according to the manufacturer's recommendations
and procedures. After assembly, the system must be inspected as a
functional unit.
m)Any kind of repair or modification of this equipment is strictly
PROHIBITED.
n) DO NOT tie knots in harnesses, lanyards and ropes. DO NOT allow
equipment to become tangled.
o) Equipment that has been exposed to extreme conditions, failed
an inspection, or has been used to arrest a fall, must be retired
and destroyed. Never expose items made with synthetic fibre
components to direct flames.
p) DO NOT use shock absorbers that have been partially deployed,
or when the plastic sheath is damaged.
q) Destroy retired equipment immediately to prevent further use.
r) All users of fall arrest gear must be medically fit for activities at
height and must wear appropriate personal protective
equipment for the environment, work carried out, and tools
used.
s) Carry out a risk assessment for every activity, and define a rescue
plan that can be safely and rapidly executed in case of emergency.