Errors In Proxy Recording - Panasonic AJ-YAX800G Manual Del Operador

Errors in proxy recording

If an error occurs during proxy data recording, refer to the following for the
appropriate action:
Error display
Viewfinder:
TURN POWER OFF
Display window:
E-30
Viewfinder:
REC WARNING
Display window:
00:00:00:11
Viewfinder:
EOM (SD)
Viewfinder:
SD CARD WRITE
ERR
Viewfinder:
PROXY CARD
ERROR
Operation and causes
Proxy data recording stops.
O Either the P2 card or the P2 PROXY card
is removed during recording.
Proxy data recording stops.
O An error occurs during recording on the
P2 card.
Proxy data recording on the SD memory
card stops, but recording on the P2 card
continues.
O No -spare capacity-on the SD memory
card.
Proxy data recording on the SD memory
card stops, but recording on the P2 card
continues.
This message is displayed when the "REC
MEDIA" menu item in the PROXY menu is
set to "P2&SD", but proxy data recording
cannot be performed on the SD memory
card.
$ Message is displayed at the start of
recording
O No SD memory card inserted.
O SD memory card formatted in an
unsupported format.
O SD memory card is write-protected.
O SD memory card contains more than
1,000 recorded clips.
$ Message is displayed during recording
O SD memory card removed during
recording.
O Error occurs during recording on the
SD memory card.
Proxy data recording
recording on the P2 card continues.
O Error occurs on the P2 PROXY card.
O Error in the input signals to the P2
PROXY card.
Turn off the P2 cam and then turn
it on again, to perform recording
and playback
checking purposes.
Restore the clips on the removed
P2 card (see page 13).
O Proxy data recorded on the P2
card are deleted.
O Proxy data recorded on the SD
memory
restored.
Insert a new SD memory card
after recording finishes.
O Proxy data being recorded on
the SD
deleted.
To restore deleted proxy data,
select clips on the P2 card and
copy them to the SD memory card
(see page 13).
Check the status of the SD
memory card, and insert another
recordable card (see page 10).
stops, but Proxy data cannot be recorded
correctly.
Turn off the P2 cam and then turn
it on again to perform recording
and playback
checking purposes.
Action
operations for
card cannot be
memory card are
operations for
12 (E)