Installing A P2 Proxy Card - Panasonic AJ-YAX800G Manual Del Operador

Installing a P2 PROXY card

Insert a P2 PROXY card into the OPTION slot of the P2 cam.
Note that the card should be inserted in P2 card slot No. 5 if another card is
already inserted in the OPTION slot.
Inserting a card into the OPTION slot
1
Turn off the P2 cam.
A P2 PROXY card will not be
recognized if it is inserted in the
camera while the power is on.
2
Remove the two screws, and lift off
the cover of the OPTION slot.
3
Confirm that the eject button is
depressed, and then insert a P2
PROXY card into the slot.
EJECT button
4
Replace the cover of the OPTION
slot, and refasten with the two
screws.
Removing the P2 PROXY card from
the OPTION slot
1Press the eject button, and confirm
that the button has popped-up.
2Press the eject button again.
This operation
PROXY card. Remove it from the
slot.
Inserting a P2 PROXY card into the
P2 card slot
Please be sure to insert the P2 PROXY
card in the No. 5 slot. Proxy data
recording will not be performed if the P2
PROXY card is inserted in a different
slot.
For more information about inserting
cards, see the P2 cam's instruction
manual.
5
releases the P2
4 (E)