Rutland 914i Windcharger
Other Items
What You Will Need - Tools
Suitable wire stripper
•
Small terminal screwdriver
•
Large flat blade screwdriver
•
Crosshead screwdriver
•
10mm Spanner or Socket
•
17mm Spanner or Socket
•
Other Items You May Have Selected
HRSi or HRDi Charge Regulator
•
Optional HRDi Remote Display
•
2 Core cable according to the Cable Specification table in this manual
•
Rutland 914i Marine Mounting Kit and Stays Kit ( CA-12/02 & CA-12/32 )
•
Short section of stainless steel tube to adapt into your own mounting design.
•
Exploded View of The Rutland 914i
Doc No:SM-137 Iss. E 11.03.19
Six Blades with
24 Screws
Nose Cone
With 3
Screws
Generator Hub
Other Items You Will Need
Mounting pole
•
Cable
•
Batteries
•
Battery terminals
•
Connector blocks (as determined
•
by your total system)
Nacelle Dome
7
Installation & Operation
Tail fin
Post Adaptor
Marlec Eng Co Ltd