Mandoline Assembly - Weston 16-0401-W Manual De Instrucciones

MANDOLINE ASSEMBLY

w WARNING
1. Attach the Removable Handle to the
Mixing Container. Align the bottom of the
Removable Handle with the "C" shaped
handle of the Mixing Container. Pull up and
over on the Removable Handle to snap the
Handle onto the Mixing Container (FIGURE
H). Test to make certain the Removable
Handle is snug into position on the Mixing
Container.
2. Line up the spout shield on the
Mandoline Base with the Spout on the
Mixing Container, turn the Madoline Base
slightly to the right to misalign the spout
shield. Place the Mandoline Base on the
Mixing Container and turn the Madoline
Base clockwise to lock the Mandoline Base
onto the Mixing Container (FIGURE I).
3. Hold a Mandoline Blade by the
plastic portion. Insert the notches of the
Mandoline Blade into the corresponding
notches of the Mandoline Base. Snap the
Mandoline Blade down into the Madoline
Base (FIGURE J).
8
Cut Hazard. Blades are sharp, use care when handling. The
use of cut-resistant gloves is suggested.
Blade Notches
When filling the Mixing Container to the maximum
NOTE:
capacity, the weight of the filler might be too much for the Handle
to bear. It is always best to hold the Handle and place one hand
under the Mixing Container for support when carrying or pouring.
Mixing Container
Mandoline
Base
Mandoline
Base
Mandoline
Mandoline
Blade
FIGURE H
Removable
Handle
"C" handle
FIGURE I
Spout
Shield
Spout
FIGURE J