Assembly - Weston 86-0701-W Manual De Instrucciones

ASSEMBLY

PLUNGER ASSEMBLY
1. Slide the Plunger Seal onto
the Plunger (FIGURE 1).
2. Assemble the Pressure
Release Valve Kit onto the
Plunger. From the top of the
Plunger, place the Washer
onto the Valve Hole, then
insert the Screw through the
Washer and into the Valve
Hole. From the underside of
the Plunger, place the Spring
onto the end of the Screw,
then place the Valve Cap onto
the end of the Screw and twist
to secure.
3. Screw the Plunger Bolt onto
the Plunger Shaft (FIGURE 2).
4. Place the assembled
Plunger onto the end of the
Plunger Shaft (FIGURE 3).
STUFFER ASSEMBLY
5. Attach the Handle by sliding
it onto either the Fast or the
Slow Gear (FIGURE 4).
6. Crank the Handle to bring
the Plunger to the top of the
Stuffer.
Plunger
Seal
Plunger
Valve Hole
Plunger
Shaft
FIGURE 3
Plunger
FIGURE 1
Pressure
Release
Valve Kit
Screw
Washer
Spring
Valve Cap
Fast Gear
FIGURE 4
Handle
FIGURE 2
Plunger
Shaft
Plunger
Bolt
Shaft
Slow Gear
Shaft
7