Assembly - Weston 86-0701-W Manual De Instrucciones

ASSEMBLY

PLUNGER ASSEMBLY
FIGURE 1
1. Slide the Plunger Seal onto
the Plunger (FIGURE 1).
FIGURE 2
2. Assemble the Pressure
Plunger
Plunger
Release Valve Kit onto the
Shaft
Seal
Plunger. From the top of the
Plunger, place the Washer
onto the Valve Hole, then
Pressure
insert the Screw through the
Release
Washer and into the Valve Valve Kit
Screw
Hole. From the underside of
Washer
Plunger
the Plunger, place the Spring
onto the end of the Screw,
then place the Valve Cap onto
the end of the Screw and twist
to secure.
3. Screw the Plunger Bolt onto
Spring
the Plunger Shaft (FIGURE 2).
Valve Hole
4. Place the assembled
Valve Cap
Plunger onto the end of the
Plunger Shaft (FIGURE 3).
Plunger
Bolt
Fast Gear
STUFFER ASSEMBLY
Shaft
5. Attach the Handle by sliding
FIGURE 4
it onto either the Fast or the
Slow Gear (FIGURE 4). Plunger
Shaft
6. Crank the Handle to bring
the Plunger to the top of the
Stuffer.
FIGURE 3
Slow Gear
Shaft
Handle
Plunger
7