Publicidad
Idiomas disponibles
Idiomas disponibles
MAINTENANCE
WARNING: To reduce the risk of injury, turn unit off and
disconnect machine from power source before installing and
removing accessories, before adjusting or changing set-ups or
when making repairs. An accidental start-up can cause injury.
Lubrication
Self lubricating bearings are used in the tool and periodic relubrication
is not required. However, it is recommended that, once a year, you
take or send the tool to a service center for a thorough cleaning and
inspection.
Cleaning
WARNING: Never use solvents or other harsh chemicals for clean-
ing the non-metallic parts of the tool. These chemicals may weaken
the plastic materials used in these parts. Use a cloth dampened only
with water and mild soap. Never let any liquid get inside the tool; never
immerse any part of the tool into a liquid.
WARNING: Always use eye protection. All users and bystanders
must wear eye protection that conforms to ANSI Z87.1.
Keep your machine as clean as possible by wiping with a clean cloth
and blowing through it with air after every 5 hours of use. If you typi-
cally wrap the cord around the tool when you store it, leave a gener-
ous loop of cord such that the strain relief does not bend. This helps
prevent premature cord failure.
Accessories
WARNING: Since accessories, other than those offered by
D
WALT, have not been tested with this product, use of such acces-
E
sories with this tool could be hazardous. To reduce the risk of injury,
only D
WALT recommended accessories should be used with this
E
product.
Recommended accessories for use with your tool are available at
extra cost from your local dealer or authorized service center. If you
need assistance in locating any accessory for your tool, please con-
tact D
WALT Industrial Tool Co., 701 East Joppa Road, Baltimore,
E
MD 21286, call 1-800-4-D
WALT (1-800-433-9258) or visit our web-
E
site www.dewalt.com.
Repairs
To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustment (including brush inspection and replacement) should
be performed by a D
WALT factory service center, a D
E
rized service center or other qualified service personnel. Always use
identical replacement parts.
Three Year Limited Warranty
D
WALT will repair, without charge, any defects due to faulty materi-
E
als or workmanship for three years from the date of purchase. This
warranty does not cover part failure due to normal wear or tool
abuse. For further detail of warranty coverage and warranty repair
information, visit www.dewalt.com or call 1-800-4-D
433-9258). This warranty does not apply to accessories or damage
caused where repairs have been made or attempted by others. This
warranty gives you specific legal rights and you may have other rights
which vary in certain states or provinces.
In addition to the warranty, D
1 YEAR FREE SERVICE
D
WALT will maintain the tool and replace worn parts caused by nor-
E
mal use, for free, any time during the first year after purchase.
90 DAY MONEY BACK GUARANTEE
If you are not completely satisfied with the performance of your
D
WALT Power Tool, Laser, or Nailer for any reason, you can return
E
it within 90 days from the date of purchase with a receipt for a full
refund – no questions asked.
LATIN AMERICA: This warranty does not apply to products sold in
Latin America. For products sold in Latin America, see country spe-
cific warranty information contained either in the packaging, call the
local company or see website for warranty information.
9
WALT autho-
E
WALT (1-800-
E
WALT tools are covered by our:
E
Publicidad
