Sauder Shoal Creek Serie Manual De Instrucciones página 5

Step 1
Assemble your unit on a carpeted fl oor or on the empty carton to avoid
å
scratching your unit or the fl oor.
Push thirty-fi ve HIDDEN CAMS (II2) into the ENDS (A2 and B2),
å
UPRIGHT (C2), BOTTOM (E2), MODESTY PANEL (F2), HUTCH
SHELF (BB2), HUTCH BACK (CC) and DRAWER BRACE (DDD). Then, insert
the metal end of a CAM DOWEL (2F) into each HIDDEN CAM except the
DRAWER BRACE (DDD) and the long edges of the ENDS (A2 and B2).
Do not tighten the HIDDEN CAMS in this step.
2F
(22 used)
(35 used)
E2
DDD
Hole
The arrow in the HIDDEN
CAM must point toward the
hole in the edge of the board.
www.sauder.com/services
Arrow
II2
A2
B2
Arrow
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
F2
C2
Do not insert CAM
DOWELS into the
long edges of the
ENDS (A2 and B2).
Arrow
II2
2F
409733
BB2
CC
Arrow
Insert the metal end of the CAM
DOWEL into the HIDDEN CAM.
Page 5