Miniland chefy 5 Manual Del Usuario página 22

ENGLISH
4.3. DISPLAY INFORMATION (Figure 2)
I. Time
II. Blending speed 1
III. Blending speed 2
IV. Steaming speed 1
5. INSTRUCTIONS FOR USE
5.1. BEFORE USING
5.1.1. UNPACK AND CLEAN (Figure 3)
Before using for the very first time we advise cleaning the jug, blade set, cooking baskets, lids, strainers and tongues
with a sponge in soapy water or in the dishwasher. See 7.1. CLEANING AND CARE for details on cleaning the product.
1. Turn the blender jug (M) clockwise until the lid hook is released from the top of the processor base.
2. Remove the blender jug from the processor base.
3. Remove the jug lid (G) and unscrew the heat insulation cover (H) from the inside of the jug lid (G).
4. Unpack and wash parts (G, H, I, J, K , L, M) and (U) carefully. Part (U) can be found in the drawer on the processor base.
5.1.2.FILLING THE WATER TANK (Figure 4)
1. Remove the water tank lid (A), pulling it up carefully as shown.
2. Open the water tank (C) turning the cap (B) anticlockwise.
3. Fill the tank (C) with water required using the blender jug.
4. Close the water tank turning the cap (B) clockwise.
5. Fit the lid (A) on to the tank (C) matching the tank nozzle relief with the lid notch and carefully press the lid down.
5.1.3. PLACING THE BLENDER JUG (Figure 5)
1. Place the blending lid (U) and the jug lid (G) over the blender jug (M) and turn the lid anticlockwise until you hear a
"click". Turn the lid clockwise if you want to remove it.
2. Place the blender jug on to the food processor base, matching the tabs on the bottom of the blender jug with the
notches in the base.
3. Turn the blender jug anticlockwise until you hear a "click". The hole on the side of the blender jug must line-up
exactly with the steam outlet on the food processor.
When the lid is fitted on to the blender jug, the hook of the lid must be fully inserted in the base hole.
Turn the blender jug clockwise if you want to remove it.
5.1.4. PLACING THE STEAMING BASKET IN THE BLENDER JUG (Figure 6)
1. Line up the arrowhead mark on the large steaming basket (L) with the front blender jug spout.
2. Insert the basket into the blender jug (M).
5.1.5. SETTING UP A LARGE COMBINED STEAMING BASKET (Figure 7)
1. Place the mid-size steaming basket (K) over the large steaming basket (L) by matching the tab on the bottom
of the mid-size steaming basket (K) with the notch on the top of the large steaming basket (L).
Place the heat insulation cover (H) over the mid-size steaming basket (K).
2. If you want to make an even larger combined steaming basket, place the small steaming basket (I) over the mid-size
steaming basket (K) by matching the tab on the bottom of the small steaming basket (I) with the notch on top of the
mid-size steaming basket (K). Place the heat insulation cover over the small steaming basket (I).
5.1.6. STEAMING SEVERAL FOODS SEPARATELY (Figure 8)
1. Turn the mid-size steaming basket (K) and/or the small steaming basket (I) by placing the bottom upwards.
Take the strainer (J) by its handle.
2. Place the strainer over the basket by matching the tabs on the basket bottom with the notches in the strainer.
Turn the strainer in any direction.
3. If you want to steam several foods separately you should now follow the steps outlined in section 5.1.5. to combine the
steaming baskets.
5.1.7. INSTALLING AND REMOVING THE BLADE (Figure 9)
1. Hold the blade (N) upside-down, as shown and position the seal (O) with the suction pad (flared part) facing upwards.
2. Push the seal (O) onto the blade spindle.
3. Hold the blender jug (M) upside-down and insert the blade's spindle into the hole inside the blender jug (M). Place
the locking ring (P) on to the blade's spindle, whilst holding the blade in position inside the blender jug (M).
4. Give the locking ring (P) a quarter turn anticlockwise to secure the blade in place.
Important: Pull on the locking ring (P) to check that the blade is properly screwed in.
V. Steaming speed 2
VI. Sterilizer on
VII. Warmer on
VIII. Water tank empty