Itm INDIRECT Serie Manual De Instrucciones página 13

GB
INDIRECT - Hot air generator with airfume heat exchanger and combustion product discharge
through a stack.
DIRECT - Direct hot air generator with dilution of combustion products in the flow of heated air.
Systems of very sturdy construction, comprising:
COMBUSTION HEAD, to an design, manufactured using precision engineering operations.
The head is fitted with air adjustment fins which can be set easily and efficiently through a
graduated scale.
Designed to optimise air flow and mixture with fuel oil.
CYLINDRICAL BOILER, high performance with a combustion chamber entirely in stainless
steel.
VENTILATION AND COOLING UNIT, high capacity, with fan fitted with aluminium blades and
guards. Onboard fuel oil pump. All components are pretested individually on a test bench.
AIR OUTLET pre-arranged for channelization only for INDIRECT generator.
ELECTRICAL SYSTEM in compliance with the protection degree IP 44, with a easily
understood, easy to use control panel. Fitted with safety fuses, flame control equipment and
indicators for correct function. An external connection can be made with an environment
thermostat.
FUEL OIL TANK, large capacity.
STRUCTURE entirely metallic and treated with epoxy resin paints.
5.
RECOMMENDATIONS PRIOR TO USE
The INDIRECT generators can be used in interior environments but nevertheless require a
sufficient supply of fresh air for correct combustion. In the event that the air supply is
inadequate, connect the unit»s air intake to the outside. The DIRECT generators are used
exclusively in exterior or well aired environments. Avoid use in the presence of foodstuffs.
IMPORTANT! Never obstruct the unit»s intake grille. All work on the equipment must be
performed cold with the mains power detached. The electrical connection must be fitted with
an efficient earth (ground). Do not place flammable or explosive materials near the unit. There
must be sufficient exchange of air where the unit is installed and no powder residues, gas or
flammable/toxic vapours at high temperatures. Do not fill the fuel tank while the unit is working;
any drips of fuel on the floor must be dried carefully. Make sure that the fan does not attract
papers, cloths, powders or any other material which may obstruct or damage the unit. Do not
start the generator without fuel oil; despite the intervention of the flame control device, the fuel
oil pump could grip. Only use the fuel oil indicated on the information plate giving technical
data for the machine.
N.B. Never add petrol or other solvents to approved fuels; when operating at particularly low
temperatures, use fuels with readily available additives.
3