Raider RD-AS04 Instrucciones De Uso Originales página 11

It will make the work better and safer in the field of the job;
3. Use the tool
Do not try to drop small tools or tools to include the use of large and powerful tools. Do not use tools for
non-specific activities.
4. Work with proper clothing
Do not wear shavings or sufferings; They can be attracted to the moving parts of the machine. For the
work of the deck, the wearing of rubber gloves and shoes with a stable gripper can be used. If you have long
hair, wear protective clothing;
5. Use safety glasses
This will reduce the risk of injury
6. Do not jump to reach outdoors beyond your reach
Always work in a stable position and constantly maintain balance;
7. Treat yourself carefully to your instruments
Keep your instruments clean to work better and safer. Observe the instructions for changing and changing
the rules. If you break the damage, you will be given a qualified person.
8. Be always prone
Keep track of what you are doing, do it in a prudent manner, and do not use the tool when you are mopped
up;
9. Push for damaged parts
If you want to get started with the tool, always carefully check that the power tools and the parts are
running and performing the functions they are assigned to. Move the centering and the snapping of the
moving parts as well as the damaged parts.
Note that all parts are securely attached, as well as any other conditions that may affect their operation.
Damaged or malfunctioning parts, breakers and ductile parts must be replaced or replaced by a qualified
person.
10. Attention! Use the tool and its accessories in accordance with the current safety instructions and in the
manner specified for the respective tool, taking into account the working conditions and the work to be done.
The use of an opaque tool other than those normally expected to take the tool may cause a mischievous
situation;
11. Only service the pump of the appliance by qualified personnel
This pneumatic tool responds to the relevant safety measures. Potential activities may only be carried
out by qualified personnel using the original segments, otherwise there is a significant risk of accidents for
the occupant.