Shark SPARTAN RS Manual Del Usuario página 12

REMOVAL OF THE SCREEN
1- Slightly open the visor by pressing the
button, then lift. The circle on the visor must
be aligned with the circle on the shell.
2- Next, pivot the locking pin toward the
front. Repeat this same step on the other
side.
3- Remove the visor by proceeding with a
pulling motion toward the front.
12
Audible motion indicator.
You can adjust the noise level of the crank by
screwing or unscrewing the hardness screw
on the screen.
WARNING! If you are not sure that
you properly replaced the visor, do
not use the helmet. The visor could sudden-
ly and without warning become detached
from the helmet while riding, causing you
to lose control of your motorcycle, re-
sulting in an accident, personal injury, or
death. Contact your retailer for any assis-
tance or advice.
1 1
WARNING! While riding at highway
speeds, do not ride with an open vi-
sor and do not try to open the visor. The
visor could become dislodged, leaving your
eyes and face unprotected. In addition,
your head could be pulled to the side. These
events could cause you to lose control of
your motorcycle, resulting in an accident,
personal injury or death.
WARNING! Tinted or dark visors
should never be used at night or
under poor visibility conditions as they
reduce your ability to see. Never ride with
a fogged visor.
2 2
WARNING! If your visor no longer
provides you with clear visibility
after a period of service, you must imme-
diately replace it. Never ride with your
vision obscured in any way. Always ride
with perfect visibility.
WARNING! The fastening of the
visor is such that it will not be pos-
sible to remove it instantly from the line of
sight with one hand should an emergency
3 3
(such as headlamp glare or misting) occur.