Publicidad
Idiomas disponibles
Idiomas disponibles
P1
78
P
BACK
*Cylinder Not Included
On ENGINEERING CODE
SD113242
78
79
78
79
78
P
Remove the following parts from the carton:
Two CYLINDER PINS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(78)
One CYLINDER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(79)
Set CYLINDER (79) on the Grill Frame and secure with the CYLINDER PINS
(78). See detail P1.
Remove plastic protective cap from TYPE 1 nipple! Insert the nipple of the
regulator (27) into the cylinder's fuel valve inlet. See detail P2. Turn the
regulator hand wheel clockwise to tighten. No tools are needed. The Hand
Wheel will come to a complete stop when the connection is secure and gas
will not flow until a positive seal is achieved.
WARNING:
During assembly of grill and when attaching or
replacing the L.P. gas cylinder, insure that the gas supply hose is free
of kinks and/or damage and is at least 3" away from hot surfaces such
as the grill casting.
IMPORTANT! TO ENSURE PROPER GAS FLOW,
BURNER CONTROL VALVES MUST BE "OFF" BEFORE
OPENING THE GAS CYLINDER VALVE.
Gas Cylinder Valve
R2
78
79
27
(Pg. 13) 1141-1986A
Publicidad
