User Maintenance - Andis CLT Instrucciones De Uso Y Cuidado

Ocultar thumbs Ver también para CLT:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 21
FAILURE TO CHARGE
1. Make sure voltage is present at the wall outlet (confirm with an appliance
you know is working).
2. Check to make sure adapter cord plug is plugged firmly into trimmer.
If failure to charge still exists, return trimmer to Andis or an Andis
authorized service station for examination and repair or replacement.
CORDLESS OPERATION
When the trimmer is running on a full charge the green High Battery
Indicator light will blink. When the trimmer reaches a low charge, the green
High Battery Indicator light will turn off and the green Low Battery Indicator
light will blink. When the the trimmer has approximately ten minutes left to
run, the red Charge Battery Indicator light will blink, indicating the trimmer
should be recharged or used with the adapter cord attached (Figure G).
USE WITH ADAPTER CORD
If the trimmer powers off in the middle of a trimming job, the adapter cord
can be attached to continue use in corded operation. When the trimmer is
running with the adapter cord attached, the green High Battery Indicator
light will blink (Figure G). The trimmer will not charge while in use with the
cord attached.
USING THE ATTACHMENT COMBS
(Some models do not have combs and sizes will vary by kit)
You can set the blades for a longer cut by using any of the attachment
combs made for your Andis trimmer. The combs mount easily; simply slip
the cutter blade teeth into comb and snap the comb down (Figure H). To
remove, simply snap off. These attachment combs guide hair into the
blades and give you precise control of hair lengths. The length of trim is
indicated on the attachment comb. Different blade angles in relation to the
skin, as well as thickness and texture of the hair will vary the cutting length.

USER MAINTENANCE

Cleaning and user maintenance shall not be made
by children without supervision.
The internal mechanism of your trimmer has been permanently lubricated at
the factory. Other than the recommended maintenance described in this
manual, no other maintenance should be performed, except by Andis
Company or an Andis authorized service station.
8

Publicidad

Tabla de contenido
loading

Tabla de contenido