Maintenance - Bosch KTS 515 Descripción Del Producto

en 18 | KTS 515 | Maintenance
4.4 Fitting the mount
The mount included in the scope of delivery permits
attachment of the KTS 515 to a Bosch trolley and
subsequent removal (only possible as of date of
manufacture 03-2006).
1. Screw in the three oval head screws contained in the
scope of delivery at the Bosch trolley (refer to fig. 4).
Fig. 4: Fitting the mount
2. Use the self-tapping screws included in the scope
of delivery to screw the mount to the KTS 515
(mounting holes are provided on the back of the
module).
3. Correct the penetration depth of the oval head
screws at the trolley to ensure secure and firm
mounting of the KTS 515.
| |
1 689 989 232 2019-01-04
5.

Maintenance

5.1 Cleaning
The housing of KTS 515 are only to be cleaned using a
soft cloth and a neutral cleaning agent. Do not use any
abrasive cleaning agent or rough cleaning cloths.
5.2 Maintenance
The tab Customer service can be used for performing
various tests in DDC. A portion of these tests can only
be performed by customer service.
5.3 Replacement and wearing parts
i
The list only contains the replacement and wearing
parts included in the scope of delivery.
Designation
System tester KTS 515
Adapter insert
OBD diagnostic cable 1.5 m
<)
Power supply unit
USB connecting cable 3 m
<)
Case
Parts set for mount
Bluetooth USB adapter
Wearing part
<)
Order number
1 687 023 479
1 688 000 349
1 684 465 555
1 687 023 693
1 684 465 562
1 685 438 648
1 687 001 853
1 687 023 777
Robert Bosch GmbH