Using The Remote Control - Haier ESAQ406P Guía De Uso Y Cuidado

STARTING THE AIR CONDITIONER cont.
FILTER RESET
This feature automatically notifies you that the air filter must be cleaned. The indicator light will
in the front panel, and press the Filter Reset button. The light will turn off.

USING THE REMOTE CONTROL

Remote control may differ in appearance from the image shown.
NOTE: Please remove the back of the controller and insert two AAA batteries.
Replace batteries after 6 months of use or when remote control starts to
lose power.
NOTE:
POWER
Press the button to turn on the air conditioner.When you first press the
button, the air conditioner will operate in Energy Save mode, Quiet fan speed and
temperature of 72°F. You can select any other mode to satisfy your needs.
Speed
High - Press High button to choose high fan speed.
Med - Press Med button to choose medium fan speed.
Quiet - Press Quiet button to choose quiet fan speed.
Auto Cool - Press Auto Cool button to choose auto cool fan speed.
MODE
FAN
- Press the fan button to activate fan mode.
COOL
- Press the cool button to activate cool mode.
ENERGY SAVE
- Press the energy save button to activate energy save mode.
DEHUM
- Press the dehum button to activate dehum mode.
TIMER
To set the air conditioner to turn off after a set amount between 1 hour and 24 hours
1. Press the TIMER ON/OFF button. Timer OFF indicator light on the air conditioner control panel
will illuminate.
2. Press the TIMER UP or TIMER DOWN arrow button to change the delay time from 1 hour to 24
hours.
3. Timer OFF indicator light on the air conditioner control panel will stop flashing after 5 seconds.
PAGE 18 USING YOUR AIR CONDITIONER
Fig. 22