Vibration Information; Specified Conditions Of Use; English - AEG BUS18BL Manual Original

Technical Data
Reciprocating Saw
Production code
Battery voltage
Stroke rate under no-load
Lengths of stroke
Cutting depth max. in:
Wood
Steel
PVC Pipes / Sections
Weight according EPTA-Procedure 01/2003
(Li-Ion 2,0 Ah...9,0Ah)
Recommended Ambient Operating
Temperature
Recommended battery types
Recommended charger
Noise information
Measured values determined according to EN 60745. Typically, the
A-weighted noise levels of the tool are:
Sound pressure level (Uncertainty K=3dB(A)) 87 dB (A)
Sound power level (Uncertainty K=3dB(A))
Wear ear protectors!

Vibration information

Vibration total values (triaxial vector sum) determined according
to EN 60745
Cutting boards
Vibration emission value a
h, B
Uncertainty K=
Cutting wooden beams
Vibration emission value a
h, WB
Uncertainty K=
WARNING
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in EN
60745 and may be used to compare one tool with another. It may be
used for a preliminary assessment of exposure.
The declared vibration emission level represents the main
applications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained, the
vibration emission may differ. This may significantly increase the
exposure level over the total working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or when
it is running but not actually doing the job. This may significantly
reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from
the effects of vibration such as: maintain the tool and the accesso-
ries, keep the hands warm, organisation of work patterns.
WARNING! Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric
shock, fire and/or serious injury. Save all warnings and instruc-
tions for future reference.
BUS18BL
SABRE SAW SAFETY WARNINGS
Hold power tool by insulated gripping surfaces, when
4671 46 01...
performing an operation where the cutting accessory may
... 000001-999999
contact hidden wiring. Cutting accessory contacting a "live"
18 V
wire may make exposed metal parts of the power tool "live" and
0 - 3200 min
-1 could give the operator an electric shock.
28,5 mm
Use protective equipment. Always wear safety glasses when
255 mm
working with the machine. The use of protective clothing is recom-
20 mm
mended, such as dust mask, protective gloves, sturdy non-slip
130 mm
footwear, helmet and ear defenders.
Chips and splinters must not be removed while the machine is
3,6 kg ... 4,3 kg
running.
-18°C ... +50°C The dust produced when using this tool may be harmful to health.
Do not inhale the dust. Use a dust absorption system and wear a
L18 ...R
suitable dust protection mask. Remove deposited dust thoroughly,
AL1218G
e.g. with a vacuum cleaner.
BL1218
Do not use cracked or distorted saw blades.
Plunge cuts without pre-drilling a hole are possible with soft mate-
rials (wood, light building materials for walls). Harder materials
(metals) must first be drilled with a hole corresponding to the size
of the saw blade.
Always place the guide shoe on the workpiece when sawing.
98 dB (A)
When working in walls ceiling, or floor, take care to avoid electric
cables and gas or waterpipes.
WARNING! To reduce the risk of fire, personal injury, and product
damage due to a short circuit, never immerse your tool, battery pack
or charger in fluid or al-low a fluid to flow inside them. Corrosive or
conductive fluids, such as seawater, certain industrial chemicals, and
15,2 m/s
2
bleach or bleach containing products, etc., Can cause a short circuit.
1,5 m/s
2
Never break open battery packs and chargers and store only in dry
rooms. Keep dry at all times.
15,2 m/s
2
1,5 m/s Use only System GBS chargers for charging System GBS battery
2
packs. Do not use battery packs from other systems.
To avoid injury and damage, never immerse the tool, removable
battery or charger in liquid or allow liquid to penetrate them.

SPECIFIED CONDITIONS OF USE

This sabre cut is intended to cut wood, plastic, and metal. It can cut
straight lines, curves, and internal cut-outs. It cuts pipes and can
cut flush to a surface.
BATTERIES
Battery packs which have not been used for some time should be
recharged before use. Temperatures in excess of 50°C (122°F) red-
uce the performance of the battery pack. Avoid extended exposure
to heat or sunshine (risk of overheating).
The contacts of chargers and battery packs must be kept clean.
For an optimum life-time, the battery packs have to be fully
charged, after use.
To obtain the longest possible battery life remove the battery pack
from the charger once it is fully charged.
For battery pack storage longer than 30 days: Store the battery
pack where the temperature is below 27°C and away from moisture
Store the battery packs in a 30% - 50% charged condition Every six
months of storage, charge the pack as normal.
Do not dispose of used battery packs in the household refuse or
by burning them. Milwaukee Distributors offer to retrieve old
batteries to protect our environment.
GB

English

15