9. Information about
Operating the Train
- Always hold the remote controller pointed at
the train.
max. 6 m
- When running the train, make sure that the
remote controller is always pointed at the train.
- If the train goes outside of the range of the
remote controller (approximately 6 meters / 20
feet) it will go further but cannot be controlled
any more.
- If the remote controller is not used in about 60
minutes, the locomotive shuts off automatically.
Pressing twice on the switch for the locomotive
will activate it again.
- No obstacle can be allowed between the train
and the remote controller.
- Do not turn the remote controller away from the
train.
10. Trouble Running the Train
• If the train does not run, check to make sure
that the batteries are correctly installed. If the
batteries have been installed correctly, and the
train still does not run, check the batteries in the
remote controller too. You may need to replace
the batteries in the train and/or the remote
controller.
• If the train clearly runs more slowly or comes
to a stop while you are playing with it, then you
need to replace the batteries. Make sure that
the automatic shutoff time has not been activa-
ted! (See Section 9)
• If the locomotive becomes damaged, do not
use the locomotive anymore and remove the
batteries from it. If car becomes damaged,
remove this car from the train and do not use it
anymore.
• If the range of the remote controller decreases,
then the batteries for the remote controller need
to be replaced.
11. Cleaning and Maintenance
• Check to see if hair or dirt gets on the axles on
the train and remove this hair or dirt from the
axles with the help of a pair or tweezers so that
the train runs correctly.
• The train can be wiped with a dry, lint-free cloth.
• Maintenance work for the train is not necessary.
15