Remington S8670 Manual Del Usuario página 4

ENGLISH
F INSTRUCTIONS FOR USE
• Before use, ensure the hair is clean, dry and tangle-free.
• For extra protection use a heat protection spray.
, Hairsprays contain flammable material – do not use while using this product.
• Select your attachment before you turn on the appliance.
, To Secure Attachments to the Handle
• Ensure the locking ring is in the unlocked position, ready to insert the
attachment.
• Locate the pins on the attachment holes on the handle (fig. 1).
• Firmly push together (fig. 2).
• Turn the locking ring anti-clockwise to secure the handle and the attachment
together, while still pressing down on the attachment (fig. 3).
1
, To Change the Straightening/Crimping Plates
• Ensure the unit is switched off and cool.
• Slide the plates out holding the plastic edges.
• Turn the plates over and slot back into place.
, To Attach the Brush and Spiral Sleeve
• Slide sleeve over the 19mm tong barrel, over the long tong clip and secure
under the shorter tong clip.
• Section the hair prior to styling. Style the lower layers first.
• Plug in the styler and press and hold the on button to switch on.
• Start styling on lower temperatures first. Select the appropriate temperature
for your hair type using the controls on the top of the styler.
4
2 3