– Ensure that the voltage indicated on the rating plate of
the appliance agrees with the mains voltage in your area.
Connect the appliance only to a properly earthed power
point with a minimum output of 6A. (Use a residual
current device (RCD) seek the advice of an electrician.)
While the appliance is in use, the mains plug must be
accessible in case of an emergency. To ensure continued
protection against risk of electric shock, connect to properly
grounded outlets only
– If the power point is unsuitable for accommodating the
plug of your appliance, have the power point changed by
a licensed electrician.
SAVE THESE INSTRUCTIONS
PARTS OF THE KETTLE
1 Hinged lid
2 Push button to open lid
3 Water level gauge
4 ON/OFF switch
ON/OFF indicator light
5 Base unit
6 Cord retainer in base unit, capacity approx. max 55 cm
cord exit at side or front
7 Max water level indicator
8 Min water level indicator
9 Scale filter
SPECIAL INSTRUCTIONS
POWER-SUPPLY CORD
– A short power-supply cord is to be provided to reduce
risks resulting from becoming entangled in or tripping
over a longer cord.
– Extension cords are available and may be used if care is
exercised in their use.
– If an extension cord is used, the marked electrical rating
of the extension cord should be at least as great as the
electrical rating of the appliance, if the appliance is of the
grounded type, the extension cord should be grounding -
type 3-wire cord. The longer cord should be arranged so
that it will not drape over the counter top or table top
where it can be pulled on by children or tripped over.
SWITCHING OFF THE KETTLE MANUALLY
The ON/OFF switch (4) can also be used to switch off the
kettle before the water boils.
4