iNsTAllATioN
– Place the appliance on a stable flat surface which is
neither hot nor near a heat source. The surface must be
dry. Keep the appliance and its mains cable out of reach
of children.
– During use, do not place the base unit on a metal tray or
a metal surface.
– Ensure that the voltage indicated on the rating plate of
the appliance agrees with the mains voltage in your area.
Connect the appliance only to a properly earthed power
point with a minimum output of 6A. (Use a residual cur-
rent device (RCD) seek the advice of an electrician.) While
the appliance is in use, the mains plug must be accessible
in case of an emergency. To ensure continued protec-
tion against risk of electric shock, connect to properly
grounded outlets only.
– If the power point is unsuitable for accommodating the
plug of your appliance, have the power point changed by
a licensed electrician.
SAVE THESE INSTRUCTIONS
pARTs of THE kETTlE
1 Hinged lid
2 Button to open the lid
3 Scale filter
4 Water level gauge
5 Reset-Button
6 Indicator light
7 Base unit
8 Max water level indicator
9 Min water level indicator
spECiAl iNsTRUCTioNs
POWER-SUPPLY CORD
– A short power-supply cord is to be provided to reduce
risks resulting from becoming entangled in or tripping
over a longer cord.
– Extension cords are available and may be used if care is
exercised in their use.
– If an extension cord is used, the marked electrical rating
of the extension cord should be at least as great as the
electrical rating of the appliance, if the appliance is of the
grounded type, the extension cord should be grounding
-type 3-wire cord. The longer cord should be arranged so
that it will not drape over the counter top or table top
where it can be pulled on by children or tripped over.
4