Qstarz BT-Q1000eX Guia De Inicio Rapido página 12

English
...................................................................................................................................................
.............................................................
quick connect device "Qstarz 1000EX" in Bluetooth
Manager. In further use, you just need to click it to
connect to this Bluetooth GPS Receiver.
H-3 Check the Serial Port in Bluetooth Setting
After complete pairing with BT-Q1000eX, please click
"Serial Port" to confirm the assigned COM port. If you use
PDA/PC to pair the GPS Receiver, please check
"Outbound COM port".
H-4 Set correct Serial Port in your map software
Activate your navigation software and make sure to
select the correct "Serial Port".
NOTE 1: In the map software such as TomTom, you might
need to change preference and set "Other
Bluetooth GPS" according to PDA/phone model. In
some case please consult map software company
to vary the setting if you have issue on positioning.
NOTE 2: There might be specific setting requirement per
navigation software. Such as Tomtom, please
delete other GPS settings under Tomtom software,
and keep one only.
H-5 Switch off the Bluetooth function
Switch off GPS function in your PDA/Smart phone/PC, then
the Bluetooth connection will be disconnected
automatically. Then put BT-Q1000eX switch to "OFF"
position.
................................................................................................................................................................................
.........
12
www.Qstarz.com