Defi Nitions: Safety Guidelines; Ec Declaration Of Conformity; Safety Instructions - DeWalt D21805 Traducido De Las Instrucciones Originales

Fuses:
Europe 230 V tools
U.K. & Ireland 230 V tools
U.K. & Ireland 115 V tools
The vibration emission level given in this
information sheet has been measured in
accordance with a standardised test given in
EN 60745 and may be used to compare one tool
with another. It may be used for a preliminary
assessment of exposure.
WARNING:
● The declared vibration emission level
represents the main applications of the
tool. However, if the tool is used for
different applications, with different
accessories or poorly maintained, the
vibration emission may differ. This may
signifi cantly increase the exposure level
over the total working period.
● An estimation of the level of exposure
to vibration should also take into
account the times when the tool is
switched off or when it is running but
not actually doing the job. This may
signifi cantly reduce the exposure level
over the total working period.
● Identify additional safety measures to
protect the operator from the effects of
vibration, such as: maintain the tool and
the accessories, keep the hands warm,
organisation of work patterns.
Defi nitions: Safety Guidelines
The definitions below describe the level of severity for
each signal word. Please read the manual and pay
attention to these symbols.
DANGER: Indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially
hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION: Indicates a potentially
hazardous situation which, if not avoided,
may result in minor or moderate
injury.
10 Amperes, mains
13 Amperes, in plugs
16 Amperes, mains
EC-Declaration of Conformity
MACHINERY DIRECTIVE
D21805/D21810/D21815
D WALT declares that these products described
E
under "technical data" are in compliance with:
98/37/EC (until Dec. 28, 2009), 2006/42/EC
(from Dec. 29, 2009), EN 60745-1, EN 60745-2-1.
These products also comply with Directive
2004/108/EC. For more information, please contact
D WALT at the following address or refer to the back
E
of the manual.
The undersigned is responsible for compilation of the
technical file and makes this declaration on behalf of
D WALT.
E
Horst Großmann
Vice President Engineering and Product
Development
D WALT, Richard-Klinger-Straße 11
E
D-65510, Idstein, Germany
03.08.2009

Safety instructions

General Power Tool Safety Warnings
E N G L I S H
NOTICE: Indicates a practice not
related to personal injury which, if
not avoided, may result in property
damage.
Denotes risk of electric shock.
Denotes risk of fire.
WARNING: To reduce the risk of injury,
read the instruction manual.
WARNING: Read all safety warnings
and all instructions. Failure to follow
the warnings and instructions may
result in electric shock, fi re and/or
serious injury.
23