Kit Assembly - Metra 95-8906HG Manual De Instrucciones

Double DIN radio provision
1. Attach the brackets to the radio
with the screws included with
radio. (Figure A)
2. Locate the factory wiring harness
and antenna plug in the dash
and make all necessary wire
connections to the radio. Metra
recommends using the proper
mating adapters from Metra
and/or AXXESS.
3. Mount the new radio assembly
into the dash.
4. Attach the (4) factory panel clips
to the 95-8906HG radio trim panel.
5. Reassemble the dash in the
reverse order of disassembly using
the 95-8906HG radio trim panel.
95-8906HG

Kit Assembly

(Figure A)
3