Program Playback 1 - Teac PD-D2410 Manual Del Usuario

1
2
1
2
3
4
20
Up to 32 tracks can be selected from any discs and played in any
desired order.
A program cannot be entered during playback.
3
4
Notes:

Program Playback 1

1 In the stop mode, press the DISC NO. (1~5) button to select a
disc number.
2 Press the TRACK NO. buttons (1~9, 0) or MUSIC SKIP buttons
(.//) to select a track number.
3 Press the PROGRAM button.
The PROGRAM indicator lights.
The TIME display shows "P-01".
< If the PROGRAM button is pressed before a disc number and a
track number are selected, track 1 of the displayed disc
number is entered as program selection number 1.
< To enter all of the tracks on a disc, select the disc number with
a DISC NO. (1~5) button, then press the PROGRAM button.
The TRACK number display shows "A".
< The first program selection is now stored in the program
memory.
Repeat steps 1 to 3 to store more tracks (a maximum of 32
tracks can be stored).
< If you try to enter more than 32 selections, the display shows
"FULL" for about 1 second.
4 When the selection of track numbers has been finished, press
the PLAY button (y) to start program playback.
Programmed play starts from the beginning of the first
programmed track.
< When programmed play starts, the entered track numbers are
displayed (1–14 only) for each disc, and the currently playing
track number blinks.
< When all of the programmed tracks have been played, the CD
changer stops.
The yindicator goes off.
The PROGRAM indicator remains lit.
< Disc and track numbers cannot be selected during
programmed play.
< The DISC SKIP button cannot be used during programmed
play.
ENGLISH