Intro Check - Teac PD-D2410 Manual Del Usuario

2
1
2
3
DISC NO.
TRACK NO.
26
1
3

INTRO CHECK

PLAY
INTRO CHECK
PLAY
Intro Check
Checking the contents of all discs
1 Press the INTRO CHECK button.
The INTRO indicator lights.
2 Select a disc number using the DISC NO. buttons (1~5).
< In order to designate a track number on the disc, press the
DISC NO. button (1~5) first, and then press the TRACK NO.
button (1~9, 0).
< If you do not want to specify the disc number, you can skip this
step and continue the procedure from next step.
3 Press the PLAY (y) button.
The first 10 seconds of each track is played back on all discs.
< If the INTRO CHECK button is pressed during intro check disc
play, the intro check mode will end and normal disc play will
continue from that point.
< If you press the INTRO CHECK button during normal play, intro
check disc play begins with the next track.
If you perform the same action while a track has played for
less than 10 seconds, the intro check disc play starts from that
track.
Checking the contents of programmed tracks
1. Program the tracks.
The PROGRAM indicator lights.
2. Press the INTRO CHECK button.
The INTRO indicator lights.
3. Press the PLAY button (y).
< Upon finishing the entire programmed intro check disc play,
the mode display changes to stop for programmed play.
< Pressing the SHUFFLE button activates intro check disc play at
random within the programmed tracks.
Intro check time setting
1. Input the desired time (1 to 99 seconds) by pressing TRACK
NO. buttons (1~9, 0).
2. Press the INTRO CHECK button.
3. Press a DISC NO. button (1~5).
< In order to designate a track number on the disc, press the
DISC NO. (1~5) button first, and then press the TRACK NO.
(1~9, 0) button.
4. Press the PLAY (y) button.
ENGLISH