Publicidad
Manual for Multi-function Calling System
(APE100 for Mobile Receiver APE6600)
Multi-function pager APE100 (hereinafter to be referred as APE100)
Mobile host/wrist receiver APE6600 (hereinafter to be referred as APE6600)
1. single call or group call debugging (The default setting for the receiver is group call)
【
】
For APE6600
Standby mode, press the key FUN for 2 seconds, F1 appears on the LED
screen. Press the key ENT repeatedly till F8 appears. Keep pressing the key FUN till a number
appears. Use the key ENT to change the number displayed. "000"is for group call and "001" is for
single call.
2. Function of the keys (For APE100)
CLR: Exiting EN: Sending
3. Read the In-line coding of the multi-function pager
Electrify the multi-function call button and the receiver. When the multi-function pager is on
"---"
standby (
showed on the screen), press the key
lights
at the same time), then release the key
4. Number Registering
【
1)
For APE6600
3 seconds, and F1 appears on the screen.
【
2)
For APE6600
FUN to choose the number you wanted.
【
3)
For APE100
then FS appears on the screen and the indicator light
MENU. With the prompt music ringing, the multi-function pager is back to standby.
【
4)
For APE6600
pressing the key ENT, then the receiver is back to standby directly. The registration is
finished.
Notes: After the registration, do not press the key
powered off and restarted. If the key
initialized and the pager needs to be registered again.
5. Paging Operation
: number changing/page turning
】
Make sure the watch receiver is on standby, then press the key FUN for
】
Keep pressing the key FUN till 001 appears, then use the key ENT and
】
When the multi-function pager is on standby, keep pressing key MENU,
】
Keep pressing the key FUN till F1 appears on the screen, and keep
for one second (the indicator lamp
is on, then, release the key
if the multi-function pager is
is pressed by mistake, the receiver needs to be
2
Publicidad
