【
1)
For APE100
appears on the screen. Press the key number "123", then "123" appears on the screen.
The numbers can be changed with the key
【
2)
For APE100
key EN. When the indicator light is off, the signal transmitting is finished and the watch
receiver displays the paging number at the same time.
Notes: After paging, the number can be added by pressing the key EN for serial call. If you
want to page the same number repeatedly, please keep pressing the key FUN till the
indicator light
number wanted and press the key EN till the indicator light
EN.
3) Keep pressing the key CLR to quit to standby mode after the paging is done.
6. Number Sending Checking (APE100)
1) Use the key
It means that there is no number sent when 000 appears on the screen.
2) Keep pressing the key CLR till the multi-function pager quit to standby mode.
Other functions of the receiver APE6600
● Prompt mode setting
1) Standby mode, press the key FUN for 2 seconds till F1 appears.
2) Press the key ENT, F2 appears.
3) Keep pressing the key FUN till a number between 001~005 appears. Press the key ENT to
choose the number wanted (number 000 means beep prompt, while number 001~005 means
vibration prompt. The vibration time can be changed from 1 second to 5 seconds as required.)
4) Keep pressing the key FUN till F2 appears.
5) Keep pressing the key ENT till back to standby mode. The setting is done.
●Display time Setting
1) Standby mode, press the key FUN 2 seconds till F1 appears.
2) Press the key ENT repeatedly till F3 appears.
3) Keep pressing the key FUN, a number between 001~099 appears. Press the key ENT to
choose the displaying time you wanted. The number 001 to 099 is the time of display, from 1
second to 99 seconds accordingly. The number 000 means unlimited time.
4) Keep pressing key FUN till F3 appears.
5) Keep pressing key ENT till back to standby mode, the display time setting is done.
● Delete registered numbers
1) Standby mode, press the key FUN for 2 seconds till F1 appears.
2) Press the key ENT repeatedly till F4 appears on the LED screen.
3) Keep pressing the key FUN, the minimum registered number appears.
4) Press the key ENT repeatedly to choose the number to be deleted. Then, keep pressing
the key ENT to delete the number. And the next registered number appears on the screen after
the deleting.
5) Keep pressing the key FUN till F4 appears.
6) Keep pressing the key ENT till back to standby mode.
●Initialization
1) Press the key [FUN] for 2 seconds and F1 appears on the screen.
2) Press the key [ENT] repeatedly till F5 appears.
3) Keep pressing [FUN] till [000] appears, and press the key [ENT] for 3 seconds to start the
】
To enter a number, such as "001": Press the number key "1", then "001"
】
Then press the key EN till the indicator light
is on, then release the key FUN. Or use the key
or
to check the latest ten numbers sent by the pager on standby mode.
.
is on, then, release the key
3
is on, then release the
to choose the