1800126766_01_GV7091E2_110 x 154 06/11/12 16:15 Page3
Before cleaning, ensure your
steam generator is unplugged
and that the soleplate and the
iron have cooled down.
Storing your generator
• Press the illuminated on/off switch and unplug the generator.
• Warning: do not touch the soleplate while still hot.
• Fold the carrying arm down onto the iron until it clicks into position, ensuring that your iron is safely locked onto
its housing.
• Store the electrical cord in its storage place -
• Store the steam cord in the cord storage clip -
• Leave the iron (and the iron rest) to cool down for 1 hour before storing it away.
• To extend the efficient operating life of your boiler and avoid scale particles
on your linen, your generator is equipped with an orange "boiler rinse"
warning light that flashes on the control panel after about 10 uses
• If the orange "boiler rinse" warning light flashes, you can continue ironing
normally but remember to rinse the boiler first the next time that you use it.
• Before proceeding, check that the generator is cool and unplugged for
more than 2 hours.
• Place the steam generator on the edge of your sink, with the iron placed to
one side, standing on its heel.
• Unscrew anti-clockwise a quarter of a turn the boiler rinse cap
• Using a coin, gently unscrew the boiler rinse cap
• Holding the steam generator in a tilted position, and using a jug, fill the boiler
with ¼ litre of untreated tap water
• Shake the base unit for a few moments and then empty it completely into
your sink
- fig. 13.
• To obtain the best results, we recommend that this operation is done twice.
• Screw back and tighten up the boiler rinse cap with a coin.
• Put the boiler rinse cap cover back in place.
• The next time you use the generator hold down the "RESTART" button
for a few seconds to turn off the orange light
fig.7.
fig.8.
3
Rinsing the boiler
- fig. 11.
- fig. 12.
- fig. 17.
EN
(once a month)
DE
- fig. 9.
FR
NL
ES
- fig. 10.
PT
IT
DA
NO
SV
FI
TR
EL
PL
CS
SK
HU
SL
RU
UK
HR
RO
ET
LT
LV