Snooze-Function - Elta 4521 Manual De Instrucciones

Setting Alarm 1 and Alarm 2
During normal mode press AL Set (2) for about two seconds to display the alarm settings. Press AL
Set (2) multiple times to switch through the mode cycle:
AL1 Hour settings - AL1 Minute setting - AL1 Weekday / Weekend settings - AL2 Hour settings - AL2
Minute setting - AL2 Weekday / Weekend settings - Normal
Adjust the corresponding settings as follows:
• Adjust the respective values with the buttons
• Hold the buttons (8) and (7) pressed for quick adjustment.
• Press AL Set (2) after each respective setting to store and to enter the next setting.
• The unit will turn back to normal mode and save all adjusted settings if you do not carry out any
setting for a few seconds.
Display showing Alarm 1 hour settings (blinking hour display)
Display showing hour settings minute settings (blinking minutes display)
Display showing Alarm 1 weekday settings
- Monday till Friday (MON TUE WED THU FRI)
Display showing Alarm 2 hour settings (blinking hour display)
Display showing Alarm 2 minute settings (blinking minute display)
Display showing Alarm 2 weekday settings
- Monday till Friday (MON TUE WED THU FRI)
18.
(8) and (7).
2. SETTING THE ALARM MODE AND TURNING ON/ OFF THE ALARM FUNCTION
Setting the alarm mode
Press AL.1 (3) / AL.2 (4) to select music or buzzer mode. For buzzer wake-up signal
the display shows 2 or 1, for radio wake-up call the display shows
AL.1 (3) / AL.2 (4) again will turn off the alarm function.
Display showing Alarm 1 with buzzer wake-up signal
Display showing Alarm 1 with radio wake-up signal
Display showing Alarm 2 with buzzer wake-up signal
Display showing Alarm 2 with radio wake-up signal
Signal sound (Buzzer)
For the first 8 seconds there is one signal sound per second; for subsequent 8 seconds there are 2
signal sounds per second and 4 signal sounds for further 8 seconds. After that the signal sounds
are beeping persistently. This signal structure will be repeated every minute.
3. DURATION OF ALARM AND SNOOZE-FUNCTION
The alarm function stays on for 30 minutes as long as you do not turn it off by pressing
Subsequently the unit resets automatically and will wake you up again the following day at the
preset time.

Snooze-Function

When the alarm is ringing press SNOOZE (10) to continue dozing; buzzer or radio will turn off
temporarily.
The snoozing sequence lasts for 9 minutes.
You can repeat the snooze function up to three times. Subsequently the unit resets automatically
and will wake you up again the following day at the preset time. During snoozing mode the displays
2 / 1 or 2 / 1 are blinking.
2 or 1. Pressing
(9).
19.