Description Of Symbols - Silverline 264125 Manual De Instrucciones

GB

Description of Symbols

The rating plate on your tool may show symbols. These represent important
information about the product or instructions on its use.
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction manual
Double insulated for additional protection
Conforms to relevant legislation and safety standards
Environmental Protection
Waste electrical products should not be disposed of with household
waste. Please recycle where facilities exist. Check with your local
authority or retailer for recycling advice
V
Volts
~
Alternating current
A, mA
Ampere, milli-Amp
n
No load speed
o
n
Rated speed
Hz
Hertz
W, kW
Watt, kilowatt
/min or min -1
Operations per minute
rpm
Revolutions per minute
dB(A)
Decibel sound level (A weighted)
m/s 2
Metres per second squared (vibration magnitude)
4
Original Instructions
Specification
Voltage: ..........................................................................230V~ 50Hz
Power: .....................................................................................150W
No load speed: ..............................................................12,000min
Base measurements: .................................................... 90 x 187mm
Sanding sheet type: ............................................. hook and loop and
Hook & loop sanding sheet dimensions: ....................... 90 x 190mm
Protection class: ........................................................................
Ingress protection: ...................................................................... IP20
Power cord length: ....................................................................2.5m
Weight: ..................................................................................... 1.6kg
Noise and vibration information:
Sound pressure L : ...............................................................72dB(A)
PA
Sound power L : ..................................................................83dB(A)
WA
Uncertainty K: ..............................................................................3dB
Typical weighted vibration a : ..............................................4.45m/s
h
Uncertainty K: ........................................................................1.5m/s
As part of our ongoing product development, specifications of
Silverline products may alter without notice.
The sound intensity level for the operator may exceed 85dB(A) and sound
protection measures are necessary.
WARNING: Always wear ear protection where the sound level exceeds 85dB(A)
and limit the time of exposure if necessary. If sound levels are uncomfortable, even
with ear protection, stop using the tool immediately and check the ear protection is
correctly fitted and provides the correct level of sound attenuation for the level of
sound produced by your tool.
WARNING: User exposure to tool vibration can result in loss of sense of touch,
numbness, tingling and reduced ability to grip. Long term exposure can lead to a
chronic condition. If necessary, limit the length of time exposed to vibration and
use anti-vibration gloves. DO NOT operate the tool with hands below a normal
comfortable temperature, as vibration will have a greater effect. Use the figures
provided in the specification relating to vibration to calculate the duration and
frequency of operating the tool.
Sound and vibration levels in the specification are determined according to
EN60745 or similar international standards. The figures represent normal use for
the tool in normal working conditions. A poorly maintained, incorrectly assembled,
or misused tool, may produce increased levels of noise and vibration.
www.osha.europa.eu provides information on sound and vibration levels in the
workplace that may be useful to domestic users who use tools for long periods
of time.
General Safety
WARNING Read all safety warnings and all instructions. Failure to follow the
warnings and instructions may result in electric shock, fire and/or serious injury.
WARNING: This appliance is not intended for use by persons (including
children) with reduced, physical or mental capabilities or lack of experience
or knowledge unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
Children must be supervised to ensure that they do not play with the appliance.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated (corded)
power tool or battery-operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents
b) Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
-1
conventional sanding sheets
2
2