Installation And Assembly; Fastening And Levelling The Unit - Astralpool DANCER JET Manual De Instalación, Operación Y Mantenimiento

[en]
Fountain units

Put up signs around the fountain in line with the country's or local regulations.
Examples of warnings: "Bathing is prohibited", "Water unsafe to drink", "Danger of
electric shock".
Do not open or handle any of the unit's components other than those for which
-
explanations are given in this manual.
The unit may only be handled by authorised personnel or qualified service engineers. Do
-
not allow unauthorised personnel or unqualified service engineers to handle it.
2

INSTALLATION AND ASSEMBLY

DANGER: Risk of serious injury. The unit is very heavy. Carry the unit with the help of
mechanical hoists or between several service engineers.
IMPORTANT:
Read the whole of the manual carefully before installing the unit.
-
Check that the unit is in a good state of repair on removing the packaging.
-
Identify all components prior to their installation.
-
2.1

FASTENING AND LEVELLING THE UNIT

Components required for fastening the unit (⑤a-⑤c) in C20/25 concrete:
Component
Anchor bolt: M12 AISI 316 threaded rod and capsule
DIN 9021 D.12 A4 flat washer
DIN 934 M12 A4 nut
12) [Optional] Lighting assembly

Halospot LEDs:

xv) Affix the LED's base to the fixed pins on the side of the water outlet ⑦.
xvi) Mount the Halospot LEDs on their bases ⑧.

Round LEDs
xvii) Apply liquid Teflon (e.g., Loctite 577) to the inner thread of the round LED ⑩,
xviii) Screw the nozzle ⑨ on the round LED ⑩ from the top and stop when the thread
xix) While holding the round LED, screw in the nozzle at the unit's water outlet ③ to
xx) Clean off any excess Teflon.
18
Secure all threads using a liquid threadlocker (e.g., Loctite 270).
the inner thread of the unit's water outlet ③ and the outer thread of the nozzle
⑨.
is level with the bottom of the LED.
the end of the thread.
Installation, operation and maintenance manual; Dancer jet
Number
4
4
12