Fishbone Offroad FB-02E Instrucciones De Uso página 4

6. Fill the supplied measuring cup with
ethanol fuel.
7. Fill the tank (4) of the stove with
ethanol by pouring from the cup to the
funnel. The tank capacity is 380 ml
(12.8 fl oz).
Pour slowly, and fill only up to the
top of the white plastic part. Do not
overfill.
8. When done, remove the funnel and the
sealing cap (5).
9. Replace the fuel tank cap (1).
10. Close the ethanol bottle and move the
bottle, funnel, and measuring cup away
from the stove.
11. Check that fuel has not been spilled on
the stove or around it. Dry any spilled
fuel before igniting the stove.
12. Insert the control pin (9) to the holder
on the center tube (8).
Igniting and using the
stove
1. Adjust power to maximum by moving
the control pin (9) all the way to the
right.
2. To ignite the stove, heat the center tube
(8) with a jet lighter for 10 ... 20
seconds.
If you do not have a jet lighter, you can
light the stove with matches as follows.
Drop 1-2 ml of ethanol fuel in the center
of the burner (7) using the supplied
dropper bottle, and light with a match.
The burning fuel will heat up the center
tube and ignite the stove.
4