Wet Shaving; Cleaning And Maintenance - Philips RQ1180 Manual Del Usuario

English
8
2 Put the adapter in the wall socket.
3 Place the shaver upside down in the holder with the display pointing towards the front of the Jet Clean System (Fig. 18).
Note: RQ1180 only: when you turn the shaver upside down, the battery indication on the display is also turned upside down so you can still see to what
level the battery is charged.
4 Press the shaver tightly into the holder to lock it into place (Fig. 19).
Note: The shaver cannot be placed in the Jet Clean System when the protection cap is on the shaving unit or when the trimmer is placed on the shaver.
The display shows that the shaver is charging (see chapter 'The display').
,
using the shaver
shaving
1 Press the on/off button once to switch on the shaver.
RQ1180: The display lights up for a few seconds.
,
2 Move the shaving heads over your skin. Make circular movements (Fig. 20).
- Do not make straight movements.
- Your skin may need 2 or 3 weeks to get accustomed to the Philips shaving system.
3 Press the on/off button once to switch off the shaver.
RQ1180: The display lights up for a few seconds and then shows the remaining battery capacity.
,

Wet shaving

You can also use this shaver on a wet face with shaving foam or shaving gel.
To shave with shaving foam or shaving gel, follow the steps below:
1 Apply some water to your skin.
2 Apply shaving foam or shaving gel to your skin.
3 Rinse the shaving unit under the tap to ensure that the shaving unit glides smoothly over your skin.
4 Press the on/off button once to switch on the shaver.
5 Move the shaving heads in circular movements over your skin.
Note: Rinse the shaver under the tap regularly to ensure that it continues to glide smoothly over your skin.
6 Dry your face and thoroughly clean the shaver after use (see chapter 'Cleaning and maintenance').
Note: Make sure you rinse all foam or shaving gel off the shaver.
trimming
You can use the trimmer to groom your sideburns and moustache.
1 Pull the shaving unit straight off the shaver (Fig. 21).
Note: Do not turn the shaving unit while you pull it off the shaver.
2 Insert the lug of the trimmer into the slot in the top of the shaver (1). Then press the trimmer downwards (2) to attach it to the shaver
('click') (Fig. 22).
3 Press the on/off button once to switch on the trimmer.
RQ1180: The display lights up for a few seconds.
,
4 You can now start trimming.
5 Press the on/off button once to switch off the trimmer.
RQ1180: The display lights up for a few seconds to show the remaining battery capacity.
,
6 Pull the trimmer straight off the shaver (Fig. 23).
Note: Do not turn the trimming unit while you pull it off the shaver.
7 Insert the lug of the shaving unit into the slot in the top of the shaver (1). Then press the shaving unit downwards (2) to attach it to the
shaver ('click') (Fig. 24).

cleaning and maintenance

Never use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone to clean the appliance and the Jet Clean
System.
- The best and most hygienic way to clean the shaver is in the Jet Clean System (specific types only). You can also rinse the shaver under the
tap or clean it with the brush supplied.
- Be careful with hot water. Always check if the water is not too hot, to prevent your hands from getting burnt.
- Clean the shaver after every shave for optimal shaving performance.
- You can clean the outside of the shaver with a damp cloth.
- Regular cleaning guarantees better shaving performance.
cleaning the shaving unit
Be careful with hot water. Always check if the water is not too hot, to prevent your hands from getting burnt.
1 Rinse the shaving unit under a hot tap for some time (Fig. 25).
Note: You can also brush the shaving unit with the cleaning brush supplied.
2 Pull the shaving head holder off the bottom part of the shaving unit and rinse it under a hot tap for 30 seconds (Fig. 26).