Maintenance And Storage; Environmental Protection - IVT RHM-800 BMC Manual De Instrucciones

Instruction manual

MAINTENANCE AND STORAGE

Before any work on the device itself,
EN
pull the mains plug.
∙ Always keep the tool and the ventilation slots (if
present) cleaned. Regular cleaning and maintenance of
the appliance will ensure efficiency and prolong the life
of your tool.
∙ If the tool should fail despite the rigorous
manufacturing and testing procedures, the repair should
be carried out by an authorized IVT customer service.
∙ Keep all nuts, bolts, and screws tight, to be sure the
tool is in safe working condition.
∙ Replace worn or damaged parts for safety.
∙ Use only original spare parts. Parts not produced
by manufacturer may cause poor fit and possible injury.
∙ Store the tool in a dry room out of reach of kids and
away from any flammable material.
∙ Never wet the device or spray water on it!
Cleaning
∙ To avoid accidents always disconnect the tool from
the power supply before cleaning or performing any
maintenance. The tool may be cleaned most effectively
with compressed dry air. Always wear safety glasses
when cleaning tools with compressed air.
∙ For safe and proper working, ventilation openings
and switch levers must be kept clean and free of foreign
matter. Do not attempt to clean by inserting pointed
objects through openings.
∙ Certain cleaning agents and solvents damage plastic
parts. Some of these are: gasoline, carbon tetrachloride,
chlorinated cleaning solvents, ammonia and household
detergents that contain ammonia.

ENVIRONMENTAL PROTECTION

Recycle raw materials instead of
disposing as waste.
Tool, accessories and packaging should be sorted for
environment-friendly recycling.
The plastic components are labeled for categorized
recycling. These instructions are printed on recycled
paper manufactured without chlorine.
10