Hunter 90408 El Manual Del Propietario página 6

maIntenanCe
This fan is permanently lubricated
and will not require additional
lubrication (oil) for the life of
the fan.
This fan requires little maintenance
and contains no user
serviceable parts. DO NOT
try to fix it yourself. Contact
qualified service personnel
if servicing is needed.
TO CLEAN:
1. Before cleaning, turn fan off
and unplug from electrical
outlet. Wipe off excess dust
with a lintfree cloth.
2. To ensure adequate air
circulation to the motor, keep
vents located at the rear of
the motor housing free from
dust accumulation. A vacuum
cleaner hose can be used to
clean these vents.
3. DO NOT immerse the fan in
water or any other liquid.
CLEANING GRILL AND BLADE:
1. Turn the fan off and unplug
from the electrical outlet.
2. Disassemble grills by carefully
removing the screw on the
bottom of the ring. See Figure 4.
3. Remove the ring.
fIGure 4
4. Use a dry or slightly damp lint free
cloth to clean the fan. Do not
use a furniture polish or any
other cleaners that leave any
residue, as they will damage
the protective Dust Armor.5.
Clean the blades with a damp
cloth. Do not use a furniture
polish or any other cleaner
which leaves a residue, as it
will damage the protective Dust
Armor on the blades
6. Use a soft, slightly damp cloth to
wipe the remaining fan parts.
7. DO NOT allow water or any other
liquid to get into the motor
housing or base.
8. Reassemble the fan after blades
and grills have dried completely.
Align the grills, replace the ring,
and replace the screw.
9. DO NOT plug fan into an electrical
outlet until it has been fully
reassembled.
Front
Grill
Screw
Ring
Power/Speed
Control Switch
6
Back
Grill
Handle
Blade
Screw
Oscilation
Knob
Base
fIGure 5
Motor
Housing
Up/Down
Adjustment
Screw