DAY Useful Everyday 721995 Manual De Instrucciones página 54

Plastic dust � lter
• Rinse the plastic dust � lter and the dust bin cover out thoroughly with clean, lukewarm
water. ATTENTION: Do not in any circumstances clean the � lter in the dishwasher! Then
shake off any remaining water and let the � lter air dry completely before reinstalling it.
• Place the dust � lter back in the dust bin cover and close it. The lever must audibly lock into
place.
• Place the dust � lter cover with the dust � lter back in the dust bin and turn it until � rmly
tightened. The cover is properly in place when the mark on the cover is pointing towards
the closed lock symbol on the dust bin.
• Then insert the dust bin back in the device. Make sure that the dust bin locks into place
properly.
Cleaning the exhaust � lter
• The HEPA-exhaust � lter is located in the
compartment on the inside of the vacuum
cleaner, under the dust � lter (see chapter
"Product contents and device overview").
• Press the catch toward the compartment
cover and remove the cover.
• Remove the exhaust � lter from the
compartment and its holder.
• Tap the exhaust � lter out over a garbage
bin and brush off any loose dirt. If
necessary, wipe out the compartment
cover with a damp cloth.
• If necessary, rinse out the exhaust � lter
thoroughly with clean, lukewarm water.
ATTENTION: Do not in any circumstances clean the � lter in the washing machine or
dishwasher! Then shake off any remaining water and let the � lter air dry completely
before reinstalling it.
• Once all parts are dry, place the exhaust � lter back in the holder and then into the � lter
compartment.
• Fit the compartment cover again and press it down until it engages audibly.
54